Melt Flow Index Tester

If you are working in the plastics or polymer industry, then you should be aware that it is important for manufacturers to test the melt flow rate of these materials. The melt flow rate of the materials is considered to be the measure of the flow of polymers when it will be melted. The result of the melt flow rate will be reported as the weight of the polymer that will flow through the orifice in a certain period of time. To make it easy for you to conduct a melt flow test for polymers, we at Cell Instruments have come up with one of the amazing lab testing instruments known as MFI tester. This amazing lab testing equipment is highly useful in testing the melt flow properties of molten plastics under various test standards ASTM D 1238-1992, IS 2267-1972, IS 2530-1963, IS 10810-1984.

This HMI-based touchscreen model will provide you with an accurate testing result of the melt flow properties of the materials. It also comes with an auto sample cutting facility with a temperature setting and preset timer functions incorporated in HMI for accuracy and repeatability. Below we have listed the advanced features of the new version of the melt flow index tester.The machine is limited to 20 MFI usage.

Specification

Models	RZ-A	RZ-B	RZ-W	RZ-C	RZ-H
Method	MFR	MFR&MVR
Control/Display	LED	PLC, touch Screen		PC, Touch Screen, PLC	PLC, Touch Screen
Software	N/A			Yes	N/A
Micro Printer	N/A	N/A	Yes
Measuring Range/10min	0.1-400g	0.1-800g(MFR) 0.1-800cm³(MVR)		0.1-3000g(MFR) 0.1-3000cm³(MVR)	(0.01～200)g(MFR) (0.1～2500)cm³(MVR)
Temperature Range	Ambient~450°C
Temp. Precision	±0.2°C		±0.5°C	±0.2°C
Time Accuracy	1S or 0.01S	0.1S
Disp. Precision	0.01mm
Load	Full Load 0.325~21.6kg
Cutting Mode	Manual, Time	Time; Auto		Time; Auto
Cylinder Diameter	9.550mm ± 0.025mm
Cylinder Length	160mm
Die	Tungsten Carbide, L8.000mm ± 0.025mm, Internal Diameter 2.095mm ± 0.005mm
Power	0.45 KW			0.5 KW	0.45 KW
Power Supply	AC220V, 50Hz

Highlights:

Test Report: Yes, in PDF format
Material: Mild Steel
Finish: Powder coated combination finish and bright chrome/zinc plating for a corrosion-resistant finish

Features

The latest model of Cell Instruments melt flow index tester i.e. MFI tester has been equipped with an advanced set of features that will make it easy for the manufacturers to conduct the melt flow test. With its highly corrosion-resistant body, you will be able to use this lab testing instrument for a longer time. Below we have listed the features of this lab testing equipment.

• HMI-based Touchscreen Model

• Result of MFI for individual test & average of all tests.

• Microprocessor-based inbuilt PID controller

• Automatic sample cutting

• Temperature setting and Preset Timer functions incorporated in HMI for accuracy and repeatability

• Die Steel barrel for uniform and the consistent heating of barrel/test cylinder.

• Test report can be generated in PDF format.

• Program profile for selecting test parameters and performing the test.

• Easy Data Management. Users can create product identification, test temperature, time, etc.

• Can be programmed Pre-Heating Time.

• Calculate the Direct MFI value with High precision Load cell interface

• Calculate the Test results, Min. /Max. /Avg.